The Cotic CYCLES ROCKET 275 is scheduled for October 2015 ... but it is already on pre-order, 12 frames will indeed be available starting the October 10, 2015.
https://www.cotic.co.uk/order/framebuilder/rocket/
The Cotic CYCLES ROCKET is available again but in a new dimension of wheel, the new 27.5 ". This enduro offers 150mm of travel and is just as agile as the previous version. This is a development of 26" model while retaining the same movement, mostly the same angles, the same bottom bracket height, but designed to leave a little more room for those larger wheels.
The front triangle is Reynolds 853 which allows it to be extremely robust, same for the rear-stay who through the use of steel are thin and allow to leave more room for the entire ankle, heel, calf. The rear triangle is aluminium7000 necessary for creating the complex shape of the assembly.
Compatible head tube with tapered forks, rear axle in 142x12, internal cable routing also for the suspended seatpost ... and many more little tricks to discover.
Available in part without damper kit with two choices for the rear shock: Fox Float Evolution or Cane Creek Inline DB. The complete bike, not normally available outside England, is mounted at the moment with the M8000 XT group (1x11), HOPE wheels, pedals RACE FACE .... get in touch with cotic cycles to get your ROCKET !
- Cotic OFI bike fit with long cockpit, corrected seat angle for dropper posts and carefully placed BB to combine stability with a fun, interactive feel.
- Reynolds 853 Ovalform and DZB tubed front end brings precision, durability and strength
- 44mm standard head tube designed with external bottom cup for taper steerer compatiblity and zero stack top cup for minimal stack height
- Custom Cotic designed 35mm heat treated cromoly seat tube for super stiff support for the main suspension pivots
- 31.6mm seatpost size is dropper seatpost compatible. The frame has external and internal 'Stealth' dropper post remote routing
- ISCG05 mounts on regular threaded bottom bracket bring drivetrain security and reliability
- Rear mech cable routed internally through the steel seatstay for clean lines and low noise
- 7005-T6 aluminium swingarm with Syntace X-12 142 x 12 rear axle
- 15mm pivots for BB and droplink thru axle style linkage clamp keep the frame solid front to rear
- Clearance for big tyres - 2.5" DH tyres run with plenty of clearance
- Geometry for speed, fun and interaction using 150 or 160mm forks. 66deg head angle and low 13.3" BB with 150mm fork
- 150mm of Cotic droplink suspension brings precision, fun and interaction via a strong progression rate on the linkage driven single pivot layout
- Sizes - 16", 17.5", 19"
- Weight - 7.6lbs for the 16" including shock
- Seatpost diameter: 31.6mm (get 380mm long minimum)
- Front Mech: 34.9mm (Bottom Pull or Side Swing, high band clamp)
- Bottom Bracket width: 73mm
- Bottom Bracket thread: Conventional English/BSA
- Chainguide Mounting: ISCG05
- Headset: 44mm for Taper Steerer forks: Hope 2H, Cane Creek ZS44 Top/EC44 Bottom, Chris King Inset I7
- Rear Hub: 142 x 12 bolt through
- Rear Axle: Syntace X-12
- Rear Mech Hanger: Syntace X-12 Type 1 (Conventional or Shimano Direct Mount)
- Shock: 200 x 57
- Shock Fittings: 15.75 x M8 Down Tube End, 19.0 x M8 Seatstay End
- Dropper Post Routing: Both external under the top tube, and Stealth via the down tube.
- Rear Brake Mounting: I.S. Compatible with up to 203mm diameter rotors
Géometry fork 160mm
Géometry fork 150mm
